Assembly
Now that all the paints have cured, it was time to piece everything back together.
Right leg complete.
And the other leg.
The waist.
Arms.
Shoulders.
With the head, I completed the assembly of the main body.
The twin buster rifle.
Re-assembling the wings required a bit of work. I had to sand down some of the joints because the joints wouldn't fit with paint over it. I also had to use glue to make sure some of the pieces to stick together.
Finally all that was left was the expansion set base but then I noticed this.
Some of the joints were shattering where the alligator clips were holding the pieces. These feather pieces are actually made from a different material from the regular model kit pieces. They are less flexible and very brittle compared to the regular materials.
Fortunately, the joints weren't completely broken to the point where I couldn't still place them onto the stand base.
And there we have it! RG Wing Gundam Zero Custom complete!
Click here to see the full album of the completed kit
Today I Learned
- If a part feels brittle or a piece is made with less flexible material, take extra caution while handling (e.g. avoid using alligator clips)
No comments:
Post a Comment